Video output devices encode stills or image sequences as analog video signal. With this interface applications can control the encoding process and move images from user space to the driver.
Conventionally V4L2 video output devices are accessed through character device special files named /dev/video and /dev/video0 to /dev/video63 with major number 81 and minor numbers 0 to 63. /dev/video is typically a symbolic link to the preferred video device. Note the same device files are used for video capture devices.
Devices supporting the video output interface set the
V4L2_CAP_VIDEO_OUTPUT flag in the
capabilities field of struct v4l2_capability
returned by the
VIDIOC_QUERYCAP ioctl. As secondary device functions
they may also support the raw VBI
V4L2_CAP_VBI_OUTPUT) interface. At
least one of the read/write or streaming I/O methods must be
supported. Modulators and audio outputs are optional.
Video output devices shall support audio output, modulator, controls, cropping and scaling and streaming parameter ioctls as needed. The video output and video standard ioctls must be supported by all video output devices.
The output is determined by cropping and image format parameters. The former select an area of the video picture where the image will appear, the latter how images are stored in memory, i. e. in RGB or YUV format, the number of bits per pixel or width and height. Together they also define how images are scaled in the process.
As usual these parameters are not reset
open() time to permit Unix tool chains, programming a device
and then writing to it as if it was a plain file. Well written V4L2
applications ensure they really get what they want, including cropping
Cropping initialization at minimum requires to reset the parameters to defaults. An example is given in Section 1.11.
To query the current image format applications set the
type field of a struct v4l2_format to
V4L2_BUF_TYPE_VIDEO_OUTPUT and call the
VIDIOC_G_FMT ioctl with a pointer to this structure. Drivers fill
the struct v4l2_pix_format
pix member of the
To request different parameters applications set the
type field of a struct v4l2_format as above and
initialize all fields of the struct v4l2_pix_format
vbi member of the
fmt union, or better just modify the
VIDIOC_G_FMT, and call the
VIDIOC_S_FMT ioctl with a pointer to this structure. Drivers may
adjust the parameters and finally return the actual parameters as
VIDIOC_TRY_FMT ioctl can be used to learn about hardware limitations
without disabling I/O or possibly time consuming hardware
The contents of struct v4l2_pix_format are discussed in Chapter 2. See also the specification of the
VIDIOC_TRY_FMT ioctls for details. Video
output devices must implement both the
VIDIOC_S_FMT ioctl, even if
VIDIOC_S_FMT ignores all requests and always
returns default parameters as
VIDIOC_TRY_FMT is optional.